Mixed-Bed Deionization System :

For applications that requires higher water quality, Mixed Bed Deionization System is often placed downstream of RO or Two Bed DI System to enhance water quality. Regenerable Mixed Bed DI System produces water quality of up to 15 –16 Mohm-cm. Capital cost of a Mixed Bed DI System is much higher than a Two Bed DI System of similar flow capacity. And regeneration of the resins after exhaustion is more complicated.

Benefits :

• Mixed Bed DI System contains intimately mixed cation and anion resins in one single column. Water fed from top of the column will be stripped of almost all cations and anions before exiting the column. The intimately mixed cation and anion resins is analogue to infinite cation and anion resin beds in series, such that water of higher quality can be produced.

Standard Features :

• Rubber lined SS41 carbon steel tank
• Pressure tested to 100 psi
• PVC SCH 80 face piping and valves
• Machined PVC distributors/ SS316 distributor
• Pneumatic Control Valves
• Inert resin layer to facilitate resins separation
• Feed water inlet rotameter
• Regeneration flow rotameters
• Compressed air pressure regulator and filter
• Compressed air rotameter
• Inlet and Outlet pressure gauges and sampling port
• PVC eductors for regenerants introduction
• Sampling ports for acid and caustic concentration
• Sampling cylinders for non-hazardous sampling
• Programmable Logic Controller
• Control panel for electrical and solenoid valves
• Indicator lights to show each regeneration step

Optional Features :

• Resistivity monitor (Optional)
• Electronic flow meter (Optional)
• Rinsing pump (Optional)
• Ambersep resins systems improve the backwash separation of cation exchange resin from the anion exchange resins, minimizing cross-contamination and providing a more efficient, more reliable regeneration. This allows for more reliable production of the highest quality water.

Specifiacations :